Search Product
Select brand

Trimble MS992 CB430 Grade Control

$ 5500
Contact form

Trimble MS992 CB430 Grade Control for sale, is in great shape loaded with great options, ready to be installed and go to work. The CB430 control box has the automatics option enabled. Both of the MS992 are in really great shape and have all 3 options enabled, track both GPS and Glonass satellites. Both the MS992s and CB430 control box have Newest Firmware Update and Active Software Warranty

Trimble MS992 CB430 package includes:

  • 2x Trimble MS992 GPS GNSS Dual Receiver with RTK AND GLONASS
  • 1x Trimble CB430 Display V. 11.21 Automatics Enabled with Newest Firmware Update and Active Software Warranty
  • 2x Trimble MS992 Smart Antenna Heads with Glonass
  • 1x Trimble SNR910 Radio 900 MHz with Wifi
  • 2x Trimble MS992 Coil Cables
  • 3x Trimble Light Bars
  • 2x Hard Pelican Case to Protect Your Equipment

Trimble MS992 GNSS Smart Antenna Specifications

Key Features & Benefits

  • An advanced RTK engine for faster initialization times when satellite lock is lost and enhanced performance near obstructions
  • Support for the GPS modernized L2C and the planned L5 signals
  • Support for GLONASS
  • Support for SBAS systems (including: WAAS, EGNOS, MSAS) Single, rugged cab or blade mountable unit - GPS antenna, receiver and isolation system
  • 3 LED indicators that provide instant operational feedback
  • Single cable connector (high cycle count connector)
  • 100% sealed housing
  • Meets EU Restriction on Hazardous Substance (RoHS) directives
  • TCP/IP capable using a serial PPP connection
  • An easy to use removable mounting bracket with quick release adjustment ratchet

Performance Characteristics

  • Tracking and performance:
    • Tracks up to 44 Satellites with 220 Tracking Channels: GPS: L1C/A, L2C, L2E (Trimble Method for tracking L2P), and L5 Code with Full Cycle Carrier
    • GLONASS: L1C/A, L1P, L2C/A, and L2P Code with Full Cycle Carrier
    • SBAS: L1C/A and L5 (for WAAS, EGNOS, or MSAS) Fully operational during P-code encryption
    • Galileo GIOVE-A and GIOVE-B4
  • Measurements
    • Advanced Trimble® Maxwell™ 6 Custom GPS chip Trimble R-Track technology for tracking the new L2C Civil Signal, L5 Signal for GPS modernization and GLONASS
    • High-precision multiple correlator for L1, L2 and L5 pseudorange measurements Unfiltered, unsmoothed pseudo-range measurements data for low noise, low multi-path error, low time domain correlation and high dynamic response
    • Very low noise L1, L2 and L5 carrier phase measurements with <1mm precision in a 1 Hz bandwidth
    • L1, L2 and L5 Signal-to-Noise ratios reported in dB-Hz
    • Proven Trimble low elevation tracking technology
    • 72 Channels L1 C/A Code, L2C, L5C; GPS L1/L2/L5
    • GLONASS L1/L2 Full Cycle Carrier
  • Code differential Positioning:
    • Horizontal accuracy: 8 mm + 1 ppm RMS (0.032 ft + 1 ppm RMS)
    • Vertical accuracy: 15 mm + 1 ppm RMS (0.065 ft +1 ppm RMS)
  • Real Time Kinematic (RTK) positioning :
    • Horizontal accuracy: 8 mm + 0.5 ppm RMS (0.032 ft +0.5 ppm)
    • Vertical accuracy: 15 mm + 0.5 ppm RMS (0.05 ft +0.5 ppm)
  • Initialization time: Typically < 10 seconds + 0.5 times baseline length in km, up to 30 km (Regular RTK operation with base station)
  • Initialization Reliability: Typically > 99.9%

Physical Characteristics:

  • Size: (height x width x depth): 147 mm x 231.9 mm x 251.1 mm
  • Weight: 3.8 kg with mounting bracke
  • Mounting: Mast Mounting Bracket
  • Network Connector: 16 pin Amphenol bayonet, sealed
  • Indicators (3 yellow LEDs):
    • Upper: DC Power
    • Middle: GPS correction signal status (via radio link or cable)
    • Lower: GNSS signal status (no signal, searching, or tracking)

Environmental Characteristics:

  • Operating Temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage Temperature: -50°C to +85°C (-67°F to +185°F)
  • Humidity: waterproof, 100% fully sealed
  • Sealing: +/- 5 psi sealing
  • Shock: 75 Gs, 6 milliseconds duration, 3 shocks in each of the three mutually perpendicular axes
  • Vibration: 20.4 gRMS
  • EMC: EN13309:2000, CE Mark, C-Tick

Technical Specifications:

  • Electrical Input Voltage: 9 to 32 VDC
  • Electrical Input Power: 18W maximum 5W nominal
  • Control Interface: J1939 CAN network (two buses) RS-232 Serial (two ports)
  • Reverse Voltage Protection:
    • Load Dump Protection: Yes
    • Tracking: Yes

Trimble CB430 Overview

Trimble CB430 Overview control Box is a rugged cab mounted machine display used in the Trimble GCS900 Grade Control System and Trimble CCS900 Compaction Control System. By using Trimble GCS900 in machine software, Trimble CB430 also supports configurations 1D / 2D to bulldozers and graders. Designed for use in harsh construction environments, is a computing device completely sealed, solid state advanced multitasking operating system, with a great light, easy to read graphical display and scratch resistant screen.

Trimble CB430 is equipped with the following standard features:

  • Rugged, ergonomic design
  • 100% watertight cast aluminum housing the machine screen, no internal moving parts
  • Advanced LCD display capable of adjusting brightness and viewing angle adapt to different lighting conditions operational
  • A multitasking operating system designed for real-time mobile application
  • Positive contact keyboard with backlit keys and tactile feel when pressed
  • Card slot environmentally sealed data speed door
  • Integrated beeper operator feedback
  • High-speed processor, low power consumption specifically for mobile applications ensures reliable operation and performance of field
  • Input Connection - a power and data connector (39-pin Mil-spec) 
One Surveying
Jl. Purnawarman No. 13-15, BEC 2 Ground Level AA09-10, Bandung, ID
Tel.: + 083842488811

© 2008 - 2019   One Surveying
Manufacturer's
logo trimble navigation logo artec 3d logo faro logo gssi logo fluke logo leica geosystem logo creaform logo topcon logo flir