Trimble MS980 CB430 Grade Control

$4500
Contact form
Description

Trimble MS980 CB430 Grade Control for sale, all in perfect working condition

This cab kit was tested working and taken off on a John Deere 850J Dozer, and will work with other equipment set up with GCS900. This cab kit has been tested working good on dozers and graders. This unit was very well taken care of

Trimble MS980 CB430 Grade Control sale Includes;

  • Trimble CB430 Display Version 11.1
  • 2x Trimble MS980 Smart Antennas Receivers with Updated 1.5 Firmware
  • 2x Trimble Masts
  • Trimble SNR900 Radio with Mounting Bracket
  • 2x Trimble MS980 Coil Cable
  • 2x Trimble Fixed Height Masts
  • GCS900 Software CD
  • 2x Hard Pelican Case

Trimble MS980 Smart GPS Antenna, Rugged, integrated GPS antenna and receiver for the GCS900 system

The Trimble MS980 Smart GPS Antenna combines the receiver and antenna into one rugged, externally mounted unit. This allows for installation as close as possible to the cutting edge for greater accuracy in machine guidance. The MS980 is the first truly modular GPS positioning sensor for sensor-independent machine control.

Portable, Flexible, Versatile – The MS980 is light and quick to remove making it easy to move between machines or daily removal. Just disconnect one cable and use the inbuilt ratchet to remove the MS980 from the mast. Now you can now quickly swap from one sensor to another as work demands.

Built to Last – Extremes of temperature, vibration, moisture and dust characterize the on-machine environment. The MS980 is designed to the toughest industry standards and has been field proven in
extensive and extreme testing. Designed for today and the future, the MS980 sensor is built with Trimble’s latest core technology to provide tracking of the new L2C signal for more robust operation.

Standard Features

  • Single, rugged unit – GPS antenna, receiver and isolation system
  • Centimeter accurate 3D GPS positioning capable of utilizing the new L2C GPS signals
  • On-machine connection by one data cable connection (J1939 CAN industry standard interface)
  • 3 LED indicators provide instant operational feedback – DC power, GPS correction signal status, GPS signal status
  • 100% sealed housing

Specifications

Physical characteristics Specifications
Size Height: 147mm (5.8”)
Width: 231.9mm (9.1”)
Depth: 251.1mm (9.9”)
Weight 3.04 (6.6 lb) ± 0.04 kg without bracket 3.76 (8 lb) ± 0.04 kg with
bracket
Indicators 3 amber LEDs: DC Power on; GPS correction signal status (via
radio link or cable); GPS signal status
   
Environmental characteristics Specifications
Temperature Operating: -40°C to +70°C (-40°F to +158°F)
Storage: -50°C to +85°C (-67°F to +185°F)
   
Technical characteristics Specifications
Electrical Input Voltage 9 to 32 VDC
Tracking Tracking 24 channels L1 C/A code, L1/L2 full cycle carrier, L2C
capable. Fully operational during P-code encryption
   
Positioning characteristics Specifications
Electrical Input Voltage 9 to 32 VDC
Tracking Tracking 24 channels L1 C/A code, L1/L2 full cycle carrier, L2C
capable. Fully operational during P-code encryption
   
Positioning characteristics Specifications
Range Up to 20 km from base station for RTK
Start-up <2 minutes

 

Mode Accuracy Latency Max Rate
Low Latency
RTK
2cm + 2ppm Horizontal3
3cm + 2ppm Vertical
<20ms 10Hz
Moving Base
RTK
1cm Horizontal4
2cm Vertical
<100m 10Hz
  1 sigma level
2 At maximum output rate
3 Assumes 1 second data link delay
4 Assumes that base – rover separation is less than 1 km
   

Trimble CB430 Overview

Trimble CB430 Overview control Box is a rugged cab mounted machine display used in the Trimble GCS900 Grade Control System and Trimble CCS900 Compaction Control System. By using Trimble GCS900 in machine software, Trimble CB430 also supports configurations 1D / 2D to bulldozers and graders. Designed for use in harsh construction environments, is a computing device completely sealed, solid state advanced multitasking operating system, with a great light, easy to read graphical display and scratch resistant screen.

Trimble CB430 is equipped with the following standard features:

  • Rugged, ergonomic design
  • 100% watertight cast aluminum housing the machine screen, no internal moving parts
  • Advanced LCD display capable of adjusting brightness and viewing angle adapt to different lighting conditions operational
  • A multitasking operating system designed for real-time mobile application
  • Positive contact keyboard with backlit keys and tactile feel when pressed
  • Card slot environmentally sealed data speed door
  • Integrated beeper operator feedback
  • High-speed processor, low power consumption specifically for mobile applications ensures reliable operation and performance of field
  • Input Connection - a power and data connector (39-pin Mil-spec) 

Resources:

Trimble-MS980-Smart-GPS-Antenna.pdf
Trimble-CB430-Control-Box.pdf

Related products

Trimble R8 Model 3 Base Rover

Trimble R8 Model 3 Base Rover
Trimble R8 Model 3 Base Rover for sale, Calibrated, Complete Base Rove...
$3900
More info Contact form

Trimble SPS882 Base or Rover with TSC2

Trimble SPS882 Base or Rover with TSC2
Trimble SPS882 TSC2 for sale, use as Base or Rover 900 MHz Internal Ra...
$4000
More info Contact form

Trimble MS992 CB430 Grade Control

Trimble MS992 CB430 Grade Control
Trimble MS992 CB430 Grade Control for sale, in really great shape and ...
$4900
More info Contact form

One Surveying

Jl. Purnawarman No. 13-15, BEC 2 Ground Level AA09-10, Bandung, ID
Tel: 083842488811
Email: onesurveying@gmail.com
Copyright ©2024 One Surveying
logo trimble navigation logo artec 3d logo faro logo gssi logo fluke logo leica geosystem logo creaform logo topcon logo flir